May 29, 2023 / Sophie Jones

Basic Steps to Fix Netgear Nighthawk Router Not Working Issue

The Netgear Nighthawk router not working issue has put a stop to many users from taking advantage of a blazing-fast and seamless internet connection. Considering you are reading this blog, we are assuming that you are stuck with the same issue. In that case, you should become aware of the reasons behind it before learning how to troubleshoot it. Doing so will take less of your time when you start resolving the issue at hand. Continue reading.

What is Stopping Netgear Router from Working Well?

Here are the topmost reasons why your networking device is not in the mood of working:

Your router is not kept within the range of the modem or you have kept them too close to each other due to which their signals are not getting transmitted properly.
In case you have used an Ethernet cable to connect the networking devices, then it has cuts. If not that, then the ports located on them are damaged.
The presence of Bluetooth speakers, microwave ovens, fish tanks, and cordless phones in the same room where the router is kept can also cause the issue at hand.
You have plugged your router into a wall socket which is not in working condition or the power cable used to connect the router to the socket is damaged.

Impartial Netgear router setup is the last of many reasons why you are stuck with the Netgear Nighthawk router not working issue.

Now that you have become aware of the reasons why your router is not functioning like a regular device, proceed further with the Netgear router troubleshooting process.

[Fixed] Netgear Nighthawk Router Not Working Issue

Fix 1: Maintain a Proper Distance

You can commence troubleshooting the Netgear Nighthawk router not working issue by maintaining a safe distance between the networking devices. This means that the distance between the router and the modem in your home should neither be too much nor too less.

Fix 2: Buy a New Ethernet Cable

Another thing that can be done from your end is to replace the existing cable with a new one. Make sure that the connection you are establishing with the aid of the new cable is finger-tight. Leaving the connection loose will only cause issues for you.

Fix 3: Change the Current Location

In case you have kept your Netgear router near devices or appliances that can mess with its signals, then change its location right away. To do so, do not keep it in corners, near thick concrete walls, and metal objects like aluminum studs. Trust us, this will take you far.

Fix 4: Use Any Other Wall Socket

In case none of the above-mentioned troubleshooting methods help you to resolve the Netgear Nighthawk router not working issue, then you should give another wall socket the responsibility of supplying electricity to your networking device.

Fix 5: Reset the Nighthawk Router

Resetting your networking device is the last resort if you are not able to make the most of it. After restoring the extender to its default mode, use the default Nighthawk router login username and password to set it up from scratch.

Wrapping up

This was all about the troubleshooting techniques that can be used to resolve the Netgear Nighthawk router not working issue. We have covered a variety of troubleshooting fixes that can be utilized to address the Netgear Nighthawk router not working issue. By implementing these solutions, you can effectively tackle common connectivity problems, ensure the router’s firmware and software are up to date, mitigate Wi-Fi interference, and perform essential resets.